Car ignition coil provider 2023: Gasoline vehicles are usually powered by a simple 12-volt DC battery. This is enough voltage to engage a starter motor and get the engine turning, but it’s not enough for actual combustion. (A spark plug needs around 40,000 volts for combustion.) That’s where the ignition coil comes in. It contains a step-up transformer (also known as a coil pack) to convert that tiny current into quick bursts of several thousand volts at a time. This electricity is then sent to each spark plug in perfect time with the cylinder’s combustion cycle, igniting fuel vapor with oxygen and producing power. Diesel engines notably lack ignition coils because they ignite their fuel using heat and pressure alone. See additional information on ignition coil manufacturers.
What is the reason? Here are some of them: The spark plug gap is too large, adjust the gap or replace the spark plug; The gasoline quality is not good, try changing to a higher-grade gasoline; The cylinder compression ratio is wrong, adjust the compression ratio; If there is a program failure on the computer board, you can go to the repair shop to test the car with a computer and clear the error message. If it doesn’t work, there may be a problem with your car’s transmission. The quality of Haiyan car ignition coil/ automotive ignition coil is guaranteed.
The primary winding of an ignition coil will typically contain 150 to 300 turns of wire; the secondary winding will typically contain 15,000 to 30,000 turns of wire, or around 100 times more than the primary winding. The magnetic field is initially created when the vehicle’s electrical system applies approximately 12 volts to the ignition coil’s primary winding. When a spark is required at a spark plug, the ignition system will switch off the current flow to the primary winding, which will cause the magnetic field to collapse. The collapsing magnetic field will induce a voltage into the primary winding in the region of 200 volts; but the voltage induced into the secondary winding will be approximately 100 times greater, around 20,000 volts.
When the electric current is initially switched on, the current flow rapidly increases to its maximum value. Simultaneously, the magnetic field or flux will progressively grow to its maximum strength, and will become stable when the electric current is stable. When the electric current is then switched off, the magnetic field will collapse back in towards the coil of wire. There are two main factors that affect the strength of the magnetic field: Increasing the current being applied to the coil of wire strengthens the magnetic field; The higher number of windings in the coil, the stronger the magnetic field.
The engine coil is the main product of Haiyan ignition coil wholesale supplier. Haiyan insists on the use of high-quality materials and advanced technology to manufacture car engine coil. Besides, we strictly monitor and control the quality and cost of each auto ignition coil production process. All this guarantees the auto ignition coil to have high quality and favorable price. According to the function, the auto repair tool cabinet can be divided into mobile tool cabinets and wall tool cabinets. Wheels are installed under the mobile tool cabinet for convenient movement. Haiyan wholesale metal tool cabinet is a shelf like a closet. Read even more details on hj-auto.com.
Haiyan car ignition coil manufacturers have professional production workshops and great production technology, our main product is the car ignition coil, automotive ignition coil and engine coil. The Haiyan car ignition coil with the national quality inspection standards, has reasonable structure, stable performance, good safety, and high reliability. Our automotive ignition coil is also available in a wide range of types and specifications. Haiyan ignition coil supplier will try our best to meet Customers’ needs.
Single ignition coils or also called plug well ignition coils are plugged directly onto the spark plug in the spark plug well. This means that each spark plug has its own ignition coil, which is controlled directly by the engine control unit. A modern ignition coil just looks like a rubber boot that slips onto its spark plug. Up top, there’s an electrical connector for receiving voltage and some threads to mount it securely on the engine. If you were to dissect the component, however, you would find several meters of tightly wound copper wiring that make up the coil pack. These are wrapped around an iron core which receives the 12V current to serve as an electromagnet. The energy stored in the magnetic field of the core is the energy that is transferred to the spark plug. Lastly, the whole coil pack is embedded in a resin insulator to prevent short-circuiting. The ignition coil uses a principle known as Faraday’s law of induction to produce incredible amounts of power, and the same law applies when constructing electric motors as well as generators.