Biscuit manufacturing machine supplier 2022? Biscuit production line used for automatic making biscuits. Whole line including raw material handling, dough mixing, biscuit forming, biscuit baking, biscuit cooling, biscuit sandwich, and biscuit packing, etc. Available for one kind of biscuit made by using one production line, or a variety biscuit made by using one multifunctional production line. Normally can divide into 2 kinds(according to soft dough biscuit or hard dough biscuit). Specifically divided into 13 kinds(according to finished product). Discover even more information on biscuit machinery. Apart from the integrated system hardware service, the services Golden Bake offers include all stages: from plant design, biscuit machinery construction, manufacture, and assembly up to the smooth commissioning phase at your site. Don’t be afraid to start a new project…
Self-cleaning filter device which can operate automatically; Assurance of environmental protection and sanitation in the working area. More importantly, it has agitating bin with weighing screw. It is Specially designed fast detachable bin without sanitary dead corner, ensuring food safety. Last but not least, there is an accurate,efficient and stable metering device. It Adopt microcomputer control screw discharging mechanism, Integrate control of machine, electricity, light, and SCM and has the function of automatic quantification and automatic adjustment of measurement errors.For the function of our auto-dosing system, they are as followings: Self-suction feeding;Dust free at negative pressure; Store and mix; Measurement of discharging; Saving of labor and effort; Automatic control. As a result, our auto-dosing system has Solve three major problems in sugar crushing in food Industry.First, High labor intensity. Secondly, Heavy dust pollution, Dirty, sticky, and disorderly, and difficult in dealing with hygiene.
With the development of the times, innovative smart turning conveyor from Golden bake ends problems by smart buckle?automatic tensioning device,cantilever frame and integrative guide and PU belt. First our turning conveyor need at most 20mins to replace the PU belt by 1 worker. Second our machine maintenance free. Third smart turning machine use hygienic and safety design. Fourth our turning conveyor has more than 12 months service life.
Horizontal mixing process must not develop the gluten in the flour, as this will result in a hard biscuit. Mixing is therefore done in two stages. In the first stage, all the ingredients are mixed except the flour and soda. The mixing continues until a consistent, homogenous cream is produced. It is important to keep the temperature of the dough low and chilled water is required for the mixer jacket.For the second stage,the flour and soda are added and mixed for 1minture at slow speed and 1-2minutes at high speed. The final dough temperature should be 18-22C.
General hard dough biscuit with layer texture need use the laminator. Usually laminated with four to six layers at around 4.0mm thickness. The dough is then gauged with a maximum reduction at each gauge roll. Excessive reductions of the dough thickness will prevent good lift or spring of the cracker. A relaxation conveyor is used to relax the tension in the dough sheet before cutting, as soda biscuit are subject to considerable shrinkage after cutting and during baking. Then dough sheet will be cut in any shape as customer want by using a rotary dough cutter. Read extra details on foodsmachine.net.