Diffuser manufacturer and supplier by chinaventech.com? Linear Bar Grille are specially designed to match with the modern interior design with outstanding performance. With fixed bars parallel to the long dimension, linear bar diffusers are a popular choice for continuous line use on a variety of application. VENTECH’s Bar Grilles are mainly used for cooling, heating and ventilation purposes. The design enables the manipulation of airflow orientation and aids to achieve the desired flow profile. Discover additional information on diffuser supplier.
Used in heating and cooling air conditioning systems, can be installed on the side wall or ceiling. The vertical louver-type air outlet has a positive-pressure air conditioning room for automatic exhaust. Normally, the louver at the air outlet will naturally sag by its own weight to isolate the indoor and outdoor air exchange. When the indoor air pressure is greater than the outdoor air pressure, the airflow will blow the louver open and exhaust outwards. Conversely, when the indoor air pressure is less than the outdoor air pressure, the airflow cannot reverse into the room, and the air outlet has a one-way check function.
The design of the diffuser is obviously different from the grille HVAC. It’s either square shape or round shape when the grille HVAC is normally rectangle shape. Besides, the blades of the diffuser are fixed in most models, but the blades of the grilles is removable or adjustable in most models. The function of the HVAC diffuser is normally supplied air while the HVAC grille is returning air. The HVAC diffuser volume is much more than the HVAC grille. The diffuser is usually installed in the ceiling. The grille is normally installed both in the ceiling and on the wall.
The damper is easy to move to control airflow. For a damper with manual control, there’s one handle you just move the handle to control the blade open and close. About the one with mechanical control, there’s a screw control part, you just use the screwdriver to move the screw will be ok. The damper is an essential part of the air diffuser and grille and HVAC system. They are used to regulate the temperature in your building while providing efficient heating and cooling. Without these dampers, the air is not evenly distributed, making your building’s temperature inconsistent. This can make the heat and cool the area not getting proper airflow. So they are very important for the duct works.
The HVAC diffusers shall be customized according to the opening size. In order to facilitate installation, the actual inner diameter (length and width) of the HVAC diffusers will be slightly less than the net opening size by 0.5-1.0 cm. Louver HVAC diffusers are widely used as air supply outlets in air conditioning systems. According to the use requirements, aluminum air volume regulating valves (miter gates) can be equipped behind the HVAC diffusers. Find additional information on https://www.chinaventech.com/.