Top rated car suspension bushes manufacturer? A single car has about 30,000 parts, counting every part down to the smallest screws. Many different parts have different functions and performance. Some of the most important automobile components include the engine, gearbox parts, drive axle, steering and suspension, brakes, and so forth. Each and every component of an automobile has significance. GJ BUSH is willing to help their customers to develop or source more autoparts, with OEM attitude. Find additional info on car suspension bushes.
A variety of natural rubber and heat resistant materials can be used to meet customer requirements. The rubber formula can be customized for low dynamic stiffness, best balancing characteristics in all directions and high durability. The product ranges from conventional, hydro, through exhaust mounting, top mounting, gearbox mounting and sub-frame mounts to conventional mounts.
The exhaust system hangers, also known as exhaust supports, are the mounts that are used to secure and support the exhaust pipes to the underside of the vehicle. The exhaust hangers are usually made of rubber to absorb vibrations from the engine and to allow for flex for the exhaust to move as the vehicle travels. This prevents the exhaust pipe from scraping along the ground.
Leaf spring bushings are used to isolate the leaf spring from the mounting hardware. Leaf spring bushings will be made of steel, rubber, brass, polyurethane, or a combination of materials. Leaf spring bushings are found in the eyes of springs and any other leaves that may mount to rigid sections of the vehicle such as a torque leaf.
A greater degree of ride comfort is achieved by effectively isolating the engine noise and vibration from the chassis and driver’s cab. Car engine mounts, which consists of metal and rubber, carries the engine, dampens vibrations and absorbs large engine forces that occur during acceleration and deceleration. The engine block is suspended in these rubbers. The rubber must be of excellent quality and have the right balance in hardness.GJ Bush engine mounts are manufactured from the high-quality steel in combination with the best quality rubber. We are a leading engine mount manufacturer since 1998. This gives the engine some play and the movements are hardly noticeable, which improves driving comfort, road holding and prevents damage to the engine.
Within 24 hours quick response rate > 99%, usually it can save 50% time of our customer every day. We are always with you closely to help you quickly find solution on suspension system. Nanchang Ganjiang Bush Factory is proud to provide premium quality OEM grade auto parts for more than 20 years. Founded in 1998 by Mr.Wang, which has almost 40 years experience on rubber bush design and production, GJ BUSH has worked very hard towards becoming a recognized leader in supplying suspension rubber parts and bimetal bushings.
The application/loading of bushing is different. We must first adjust the rubber hardness, rubber/metal structure and the size of the occupied volume to meet the dynamic/static stiffness required by the customer. Then, make appropriate corrections to achieve the target stiffness and torsion in the main direction, yaw and endurance. The bushing frames is different, including: pure rubber bushings, single-frame bushings, double-frame bushings, three-frame bushings and multi-frame bushings. The pure rubber bushing can be used alone, or it can be used after being pressed into the inner and outer frames. Discover extra details on https://www.gjbush.com/.