Quality power press machine manufacturer and supplier right now? Hydraulic transmission is adopted, and the slider part is composed o slide, an oil cylinder and a fine-tuning structure of a mechaicl stoper. Te left and right oil cylinders are fixed on the frame, the piston (rod) drives the slider to move up and down through hydraulic pressure, and the mechanical stop is controlled by the numerical control system to adjust the value; Workbench part: controlled by the button box, the motor drives the stopper to move back and forth, and the moving distance is controlled by the numerical control system. The minimun reading is 0.01 mm (the front and rear positions have travel switch limits). Discover additional details at hydraulic press machine.
In order to choose the lowest onnage specifiction,itis best to plan for a bening radus larger than the thickness of the material, and use the free bending method as much as posible When the bending radius is large, it often does not affect the quality of the finished part and its future use. Bending accuracy requirements are a factor that needs to be carefully considered. It is this factor that determines the need to consider a CNC bending machine or a manual bending machine. If the bending accuracy is required to be ±1 and cannot be changed, the CNC machine must be focused.
We can provide installation service for all the sold out machines at customer factory. Small machines can be shipped assembled and some big machines must be shipped disassembled. That is why we provide installation service to our customer. World has been committed to the development and production of power press machines since it was established in 1953. More than 100 experienced engineers are working in the three R&D centers, one in Shanghai, one in factory and another one in Ningbo.
Under the same load, the deflection of the worktable and sliding block of the 10-foot machine is 4 times that of the 5-foot machine. This means that shorter machines require fewer shim adjustments to produce qualified parts. Reduced shim adjustment and shortened preparation time. Material grade is als a key factor. Compared with low-arbon sel, the load required by stailes stee is usuall increasedby about 50%, while most grades of soft aluminum are reduced by about 50%. You can get the machine’s tonnage table from the bending machine manufacturer at any time. The table shows the estimated tonnage required per foot length unde diffrent thicknesses and different materials.
World Precise Machinery (China) is the biggest branch factory of World Group which is focusing on producing and technology researching of power press machines. The original factory was built in 1953 to produce small eccentric punching machines for new China industry. World Group bought this factory in 1998 and expanded the production capacity and the product ranges. Now World can supply power press capacity from 6.3ton to 2500ton, C fame and H frame crank press, tie-rod and mono block type eccentric gear press, hydraulic shearing machine and bending machine (press brake), fiber laser cutting machine and the automatic accessories such as decoiler, straightening machine and roller NC feeder. Read even more details at pressmachine-world.com.